Separating waste in J&M Skip Bins

Why We Keep Different Waste Types Separate in Our Skip Bins

When you hire a skip bin from J&M Skip Bins, we’ll usually ask what type of waste you plan to put in it. That’s not just so we know what size bin to send — different types of waste need to be handled, transported and disposed of differently.

Separating waste at the source helps us direct different materials to appropriate recycling, recovery or disposal facilities. It can also help keep disposal costs under control and prevent an otherwise recyclable load from becoming contaminated.

Simply put, what happens to your waste after we collect the bin depends heavily on what has been put into it.

Different Waste Has Different Disposal Pathways

A skip bin containing household rubbish is very different from a bin containing clean concrete, bricks, soil, green waste or scrap metal.

When suitable materials are kept separate, there may be opportunities to recycle, recover or reuse those materials rather than treating the entire load as mixed general waste.

Once different waste types are mixed together, separating them later can be difficult, expensive or sometimes impractical. That’s why good waste separation starts when the bin is being loaded — not after we collect it.

Separating Waste Can Help Control Disposal Costs

Waste facilities charge differently depending on the type and weight of material being received. A bin booked for one type of waste but filled with another may therefore cost considerably more to dispose of than expected.

Contamination can also change how an entire load needs to be handled. For example, adding general rubbish to a load intended for a particular waste stream may prevent that material from being handled through its intended recycling or recovery pathway.

Telling us what you have when you book helps us provide the right bin, advice and pricing from the beginning.

Some Waste Needs Special Handling

Not everything can simply be placed into a general skip bin. Some materials need to be identified and handled separately because they require particular transport, recycling or disposal arrangements.

This can include materials such as asbestos, tyres, batteries, liquids and other potentially hazardous or restricted wastes. These materials should never be added to a skip bin unless they have been specifically discussed with us and the appropriate arrangements have been made.

J&M Skip Bins is licensed by the NSW EPA to transport applicable waste, including asbestos waste, under EPL 21571. If you’re unsure about a particular material, contact us before putting it in the bin so we can advise you on the appropriate service or disposal pathway.

Keeping Recyclable Materials Separate

Separating waste can also create better opportunities for materials to be recovered or recycled.

Materials such as scrap metal, concrete and bricks may have different recovery options from mixed household or construction waste. Keeping these materials separate where practical means they can be directed to an appropriate facility rather than unnecessarily mixing them into a general waste load.

This doesn’t mean every item placed in a J&M skip bin will automatically be recycled. What can be recovered depends on the material, contamination and the facilities available for that particular waste stream. However, keeping suitable materials separate gives them a much better chance of being handled through the appropriate pathway.

What If You’re Cleaning Up Several Types of Waste?

Separating waste doesn’t need to make your clean-up complicated. Most clean-ups involve more than one type of rubbish, and we don’t expect customers to be waste experts.

When you contact us, tell us what you’re cleaning up and the main types of material you expect to have. We can help determine whether it can go into one bin or whether some materials should be kept separate.

For larger clean-ups, construction projects or commercial sites, separating particular waste streams may also make the job easier to manage and help avoid unnecessary disposal costs.

Want to check what can and can’t go in your bin? See our What Can I Put in a Skip Bin? guide for more information.

Not Sure What Can Go in the Bin? Ask Us

If you’re unsure whether something can go into your skip bin, it’s always better to ask before loading it.

J&M Skip Bins provides skip bin hire and waste collection services throughout Cooma, Jindabyne and the wider Snowy Monaro. Tell us what you’re disposing of and we’ll help you choose the right bin and determine whether any materials need to be kept separate.

Contact J&M Skip Bins before you load the bin if you’re unsure — we’re happy to help.

Leave a Reply

Your email address will not be published. Required fields are marked *